AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
![]() UAD plug-in latency can be automatically compensated with Input Delay Compensation (IDC). When Digital Mirror is ON, the Monitor Level knob controls both the digital output level and the analog monitor output level (these digital outputs are post-fader when mirrored). This feature is typically used when connecting to the stereo inputs of other devices with digital inputs such as a speaker system, stereo recorder, or external D/A converter. This setting configures the S/PDIF outputs (Apollo, Apollo 8/x8, Apollo 8p/x8p and Apollo x4) or AES/EBU outputs (Apollo 16/x16) to mirror the Monitor 1 and 2 outputs. ![]() From the Clock Source drop menu, choose the clock source.This area flashes red if the currently selected clock is unresolved (when digital audio is not synchronized). The active clock source (Internal, ADAT, S/PDIF, or Word Clock) is displayed here. From the Sample Rate menu, select the new sample rate.At the left of the LUNA window, click the UA icon, then click Settings.To change the hardware sample rate from Hardware Settings: At the lower right corner where the Rate is displayed, click the sample rate, and choose the new sample rate.Make sure the Info section is displayed (View > Section > Info).To change the hardware sample rate from within a LUNA session: You can switch the sample rate of a session at any time, and LUNA will create temporary audio files to maintain the session pitch and time. The sample rate is displayed and selectable in the Settings > Hardware Panel > Sample Rate menu, and also in the Rate menu at lower left of LUNA’s main window. LUNA can run a session at any supported hardware sample rate. Specify the location and filename, and click Save. From the app menus, choose File > Save a Copy As.From the LUNA app menu, select File > Revert To, and select a version to which to revert.To revert to a previous autosaved version: In the Autosave Interval field under Miscellaneous in the Options panel, type an auto-save interval in minutes.Open the LUNA Sidebar by clicking the UA diamond logo on the left of the screen, and clicking Settings, or choose LUNA > Preferences from the app menu.Using Monitor, Control Room, and Talkback sectionsĬonfiguring the Session Autosave interval To specify an automatic save interval:.Configuring the Session Autosave interval.If applicable, add screenshots to help explain your problem.Īdd any other context about the problem here.You can configure settings for LUNA using the Setting screens, or by choosing LUNA > Preferences from the LUNA menus. ![]() It says No Supported Display Found even though it found it right away on my 2018 Mac Mini with Intel Processor.Įxpected to work the same as it did on my Big Sur 2018 Mac Mini Intel. Display shown in Big Sur System Preferences is correct but Monitor Control cannot findĪnything so it is just blank under displayĪ clear and concise description of what you expected to happen. Monitor that I used on the 2018 Mac Mini Intel w/Big Sur. Worked perfectly on my 2018 Mac Mini using an Intel chip with Big Sur so it is not a Big Sur issue, on the New Mac Mini with apple's M1 chip it cannot find the exact same
0 Comments
Read More
Leave a Reply. |